Switch Power supply
a)
Supply for switching 20-30V
wave guide switch.
May be used with any type
of switch…..wave guide or coax.
Also can be used for a ganged pair
of input/output switches.
(Voltages and polarities must be the
same…..3 Amp max.)
b)
Universal voltage input.
c)
Areas on Switch Ports for
Reference designation Labeling.
d)
Change the polarity of the
switch by simply swapping two
connections.
Click here to see example
e)
Interface via screw type
terminal block. 3 connections
for switch commands (Position 1,
Position 2, Common. 3
connections for position Indicators
(Position 1, Position 2, Common).
No Crimp tools required.
f)
Front panel AC switch is also
the AC circuit breaker.
g)
Front panel switch position
indicators.
h)
Supplies 3 Amps @ 28V.
i)
Rugged front panel momentary
up for position 1 down for position 2 switch.
j) Run a low power fan (24V) off
terminal block.
