|
|
UPL-2 1:1 Redundant Switch Controller |
The UPL-2
can be interfaced with any type of amplifier that provides a dry contact
output for fault status. Amplifiers could be HPAs, TWTs, or Upconverters
.any redundant amplifier system that operates a Switch. |
|
|
1:1 Redundant Amplifier Switch Controller
Description for the Model UPL-2 |
The UPL-2 can be interfaced with
any type of amplifier that provides a dry contact output for fault status.
Amplifiers could be HPAs, TWTs, or Upconverters
.any redundant amplifier
system that operates a Switch. |
|
|
Basic Switch Controller |
Supply for switching 20-30V wave
guide switch.
May be used with any type switch
..Wave Guide or Co-ax.
Also can be used for a ganged pair of input/output switches. |
|
 |
DNL-5
1:2 Downlink Redundant
Switch Controller |
The
DNL-5 is a 1:2 downlink amplifier controller.
Each Amplifier is powered by its own power supply (24v).
The controller contains 3 LNB power supplies, 1 separate 28V switch power
supply (negative common on switches), 1 logic power supply, 2 co-ax
switches, 3 bias tees, low power load, Universal AC inputs. TUV Approved. |
|
 |
DNL-4
1:1 Downlink Redundant
Switch Controller |
The DNL-4 is a 1:1 downlink
controller that contains a co-ax switch, Bias Tees, and independent power
supplies for the amplifiers. |
|
 |
UPL12A
1:2 Uplink
Controller |
The UP12 can be interfaced with
any type of amplifier that provides a dry contact output for fault status.
Amplifiers could be HPAs, TWTs, or Upconverters
.any redundant amplifier
system that operates a Switch. |
|
|
1 FOR 1 Uplink Controller |
Interfaces to 1 waveguide switch,
2 Amplifiers. |
|
|
6 Channel Audio Alarm |
6 Channel Loss of Audio Alarm panel. Set your own time delay. |
|
|
VPC Controller |
Variable Power Combiner Controller |
|
|
VSAT-3 |
Controller used in VSAT applications |